Performance Alloys & Services Inc.

N116 W18515 Morse Dr.
Germantown, WI 53022
Phone: (262) 255-6662 or
1-800-272-3031
Fax: (262) 255-3655

credit-card.gif (2215 bytes)

Performance AlloysŽ

...World Wide Distributor of Beryllium-Free Copper Alloys...
Manufacturer of Standard & Custom Components

Site Updated Often! To ensure proper viewing please Refresh page &

MAKE SURE YOUR BROWSER IS SET TO UPDATE AT EACH VISIT

Welcome to our web site and thank you for your interest. Established in 1987. Since the beginning our primary business focus is to provide our customers HIGH Quality Beryllium-Free Copper Alloy materials & products for numerous INDUSTRIAL APPLICATIONS. TESTED, TRUSTED, PROVEN SUCCESSFUL!!!!!!

Performance AlloysŽ
Please use the Index in the left column
& the SITE INDEX at the bottom center
to navigate our site and links.

Performance AlloysŽ means
Beryllium-Free Copper Alloys & Products! Our Products must be GREAT because competitors are copying them!!!!

OUR ALLOYS ARE USED IN NUMEROUS APPLICATIONS WHERE BERYLLIUM COPPER ALLOYS WERE PREVIOUSLY USED. Our MoldStar PRODUCTS SHOW MEASURABLE & SIGNIFICANT PERFORMANCE IMPROVEMENTS OVER THE BERYLLIUM COPPER PRODUCTS. TIME AND TIME AGAIN!!!!!!!!!!!!!!

Reduce Galling and Wear Failure!!

Contact Performance Alloys to learn more about selecting bronze alloys for ejector sleeve and other motion system performance improvements.

wpe2.jpg (18267 bytes)

By Performance Alloys

Performance Alloys and Richard Childress Racing announce a multi-year technical partnership. MoldstarŽ Copper Alloys and Performance Alloys offer the winning combination in extreme motorsports applications. (read more)

Performance Alloys will be at the PRI Show 2013. Stop by and see all the new and exciting race components. (read more)

Elsewhere in Motorsports, for the past nine years Performance Alloys' MoldStarŽ Copper Alloys have been increasingly used as Valve Seats and Bushings in all types of Motor Sport Racing. From weekend warriors all the way to Top Fuel Dragsters. "It is actually hard to find a professional racing format/class where MoldStarŽ90, is not used at least as the exhaust seats". Many teams are using the product on both intake and exhaust. NASCAR, IHRA and NHRA teams using our product say "MoldStarŽ90 outperforms any other product on the market, the wear, cracking and erosion problems are non-existent with the MoldStarŽ90". (read more)

MoldStarŽ Copper Alloys in the Petrochemical Industry (call us about these applications!)

Ejector Sleeves Made Using Aluminum Bronze in Place of Tool Steel While tool steel material is the more traditional material selected when making ejector sleeves, there are alternatives in the market that can avoid the shortcomings inherent with tool steel.

Making sleeves using aluminum bronze alloys strategically eliminates all the heat treatment requirements, pre and post heat treatment machining, as well as the potential for retained austenite in tool steel. Also, like hardness bronze or copper alloys can be run in combination without fear of galling. An aluminum bronze component can be run on a like hardness tool steel without fear of galling. Nitrides of any sort become unnecessary.

Click Here to read that entire Article from Moldmaking Technology Magazine

wpe1.jpg (4750 bytes)

LET US MAKE IT FOR YOU!!!!!!! In addition to raw materials we also offer finished machined components at competitive prices, with on time deliveries and unmatched quality. We are proud that consistently, year after year, our customers rate us at the highest levels for our Quality, Service, Competitive Prices and On-time Deliveries. See our list of modern equipment. All on site in our facility, ready to serve you and compliment your capabilities and improve your lead times and service to your customer.

We personally invite you to let us show you our exceptional level of quality and hassle free service.

Performance Alloys & Services Inc.
N116 W18515 Morse Drive
Germantown, Wisconsin 53022

Phone Toll Free In North America 1-800-272-3031 or 1-262-255-6662
Fax: 1-262-255-3655 or E-Mail: sales@moldstar.com

DIRECTORY OF TELEPHONE EXTENSIONS:

SALES: 108 sales@moldstar.com

JOHN KARST: 106 johnk@moldstar.com

MIKE BADURA: 105 mikeb@moldstar.com

SCOTT MOBERG: 104 scottm@moldstar.com

ACCOUNTING: 101 accounting@moldstar.com

SITE INDEX

If you are unable to use this site index Click Here .

Disclaimer

While the information contained is deemed reliable, no warranties are expressed or implied. For specific information regarding an application please call 1-800-272-3031 or e-mail us at sales@moldstar.com